Section 7 - Cleaning
Cleaning
For the best cleaning results, disassemble the helmet according to the instruction manual provided with the helmet. Mild soap and lukewarm water remove most dirt and some smoke residue. Rinse the helmet with lukewarm water after using any cleaning agent.
If stronger cleaning agents are required, Bullard recommends these commercial products -- Formula 409, Joy, Mr. Clean, Fantastik, and Windex.
Some cleaning agents contain chemical solvents that attack thermoplastic helmets such as the PX. Solvents can destroy the helmet, especially when applied to stressed areas such as key slots, faceshield mounting brackets, or the rear brim D-ring. Bullard's warranty does not cover helmets damaged by incompatible solvents. Helmets will be replaced at the owner's expense.
Never use 1,1,1,-trichloromethane, other aromatic/chlorinated hydrocarbons, or brake fluid to clean helmets. These common chemical solvents attack the shell material.
Contact Bullard if you have questions about chemical solvents not listed above.