DC50 Series DUAL-COOL
DC50

  • Cools incoming compressed air by at least 30°F (17°C)

  • Double vortex system sends one stream of air to the respirator and one stream to a DC70 Series vest for torso cooling

DC50 Series DUAL-COOL®

The DC50 Series provides superior cooling to Bullard respirators, while also sending cool air to the DC70 Series vest for upper torso cooling. The DUAL-COOL will cool incoming air from compressed breathing sources by as much as 30°F (17°C). Separate control knobs allow the worker to adjust the temperature of air to each zone.

A complete system includes the DUAL-COOL tube, DC70 Series cooling vest and breathing tube (each component must be purchased separately).

DC50 Series DUAL-COOL systems are NIOSH approved for use with Bullard's 88VX, CC20, GR50 or MB30 Series airline respirators.

See the respirator's instruction manual for approved model numbers, air pressure ranges and air supply hose lengths.

WARNING:
Use of the DUAL-COOL system requires a breathing air compressor with a capacity to supply a minimum of 30 cfm (850 lpm) of air.

 

 

Last Updated On: 7/16/04