Blasting Helmet Evaluation

June 13, 2022 June 29, 2022 Bullard Bullard

Abrasive blasting is a tough, gritty job. However, much of the testing, evaluation, and review of sandblasting equipment is performed in a very controlled environment. Any long-time abrasive blaster will tell you that a blasting job site with real-life conditions is the ideal testing ground for new blasting equipment, particularly blasting hoods.

To conduct a thorough and realistic field evaluation test for an abrasive blasting helmet, use the following template and tips below.

Blast Helmet Field Test Tips and Best Practices

Conduct any field test with your actual blasters
These are the people who will be using this equipment, and they understand best which features help them perform their job most easily and efficiently.

Bring a current helmet
For any field test, compare the current blasting helmet against any other helmets you are evaluating.

Test at an actual job site under real blasting conditions
Trying on a blasting helmet in a conference room, break room, or showroom does not adequately show how the helmet fits or feels under the heat, grit, and movement patterns of a blaster at work. Pay attention to conditions inside the helmet after using for a shift (like sweaty padding), and imagine that after one month or one year of use. You may even want to test the helmet under various scenarios, such as sandblasting, bead blasting, shot blasting or soda blasting.

Document as you go
Even though it’s tempting, don’t wait until you’re back at the office to document the users’ feedback of the test. Write down the testers’ feedback at each step in the process. Use a separate form for each field tester.

Blast Helmet Field Test Form

Items Needed:

Current blasting helmet
Test helmet(s)
Accessories and attachments for test helmet (cooling tube, breathing tube, cape, etc.)
Active abrasive blasting job-site
Experienced blaster(s)
Printed copy of field test form(s)
Pen or pencil

Step 1. The Hold Test

Hold the test helmet in one hand and current helmet in the other.

Do you feel a difference in the weight of the helmets?___________________________________

Which helmet feels lighter?__________________________________________________________

Need to Know: Lighter weight helmets mean less neck strain at the end of a full shift.

Step 2. The Balance Test

Attach the appropriate cooling device for the helmet(s) being tested. Then adjust any inserts or cheek pads to determine the appropriate fit.

Need to Know: Removable inserts will allow for easier sanitizing.

Evaluate the stability of the helmet. How stable does the helmet feel on your head with each of the following movements?

Bending forward_______________________________________________________________

Squatting down________________________________________________________________

Turning head to look over right/left shoulder_______________________________________

Step 3. The Fit & Function Test

Use the helmet while blasting an actual job. Check for the following aspects regarding fit and function. Does it perform differently with different types of media blasting?

How cool is the air inside the helmet?_________________________________________________

How does the airflow compare to your current helmet?_________________________________

Is anything impairing the flow of air to your head or face?_______________________________

How well did the breathing tube and helmet move with you as you worked?_______________

Step 4. The Wear & Tear Test

Getting peace of mind about the durability of a blasting helmet includes not only the design features, but also the support of the helmet manufacturer. To help understand the toughness and long-lasting qualities of the helmet, note the following:

Length of Manufacturer’s Warranty___________________________________________________

Items Covered under Warranty_______________________________________________________

What design features prevent wear and tear in vulnerable areas?